SAFT-C 60 NBR-60 M10-AG
Part no.: 10.01.01.11938
Flat suction cup (round) for best dynamics on smooth, oily surfaces
| Size | 60 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | Aluminum |
| Connection | M10-AG |
Flat Suction Cups SAFT-C
Modular suction cup with reusable nipple through simple screw mounting from below
Wear optimized friction disc and friction force optimization through two elastomer components
No separation necessary during recycling, as the suction cup is made completely of plastics
Structured support surface prevents deep drawing and withstands the highest lateral forces even on oily sheets
Soft sealing lip also adapts to slightly curved surfaces
Design
Design
- Robust and wear-resistant suction cup SAFT-C with single sealing lip, special slot and inner support
- Suitable for use together with special tooling
- Separate suction cup and friction disc, made of different elastomer materials
- Suction cup made completely of plastic (no metal insert)
- Suction cup and friction disc can be replaced separately, retaining the connection nipple
Technical Data
Technical Data
- Diameter: 60 and 80 mm
- Material: NBR
Documentation
Documentation
The matching documentation for this product is available in this section.
| Documents | Language |
|---|---|
| English |
1 - 2 from 2 results
SAFT-C 80 NBR-60 M10-AG
Part no.: 10.01.01.11940
Flat suction cup (round) for best dynamics on smooth, oily surfaces
| Size | 80 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | Aluminum |
| Connection | M10-AG |