Innovative product design according to ISO TS 15066 enables MRK operation
Modular lightweight construction for a low weight and thus a higher effective lift capacity
Particularly energy efficient, integrated vacuum generation for low operating costs with high operational reliability
Low sound level for minimal noise during collaborative operation
Integrated control valves for minimum cycle times and interference contours
The matching documentation for this product is available in this section.
| Documents | Language |
|---|---|
| English |
1 - 6 from 6 results
Part no.: 10.01.44.00370
Large-area vacuum gripping system with flow resistances
| Shape | Integrated vacuum generation |
| Function | controlled |
| Length L | 120 (mm) |
| Width B | 60 (mm) |
| Height H | 56 (mm) |
| Nozzle diameter | 0.5 (mm) |
| Number of suction cells | 16 |
| Number of ejectors | 2 |
| Design vacuum generator | Ejector module SEP |
| Control valve | Normally open |
| Weight | 0.31 (kg) |
Part no.: 10.01.44.00371
Large-area vacuum gripping system with flow resistances
| Shape | Integrated vacuum generation |
| Function | controlled |
| Length L | 120 (mm) |
| Width B | 60 (mm) |
| Height H | 70.2 (mm) |
| Nozzle diameter | 0.8 (mm) |
| Suction cup type | SPB2 |
| Number of suction cells | 10 |
| Number of ejectors | 2 |
| Design vacuum generator | Ejector module SEP |
| Control valve | Normally open |
| Weight | 0.33 (kg) |
Part no.: 10.01.44.00437
Large-area vacuum gripping system with flow resistances
| Shape | Integrated vacuum generation |
| Function | controlled |
| Length L | 220 (mm) |
| Width B | 80 (mm) |
| Height H | 80.4 (mm) |
| Nozzle diameter | 1.3 (mm) |
| Number of suction cells | 24 |
| Number of ejectors | 3 |
| Design vacuum generator | Ejector module SEP |
| Control valve | Normally open |
| Weight | 0.81 (kg) |
Part no.: 10.01.44.00373
Large-area vacuum gripping system with flow resistances
| Shape | Integrated vacuum generation |
| Function | controlled |
| Length L | 220 (mm) |
| Width B | 80 (mm) |
| Height H | 84.7 (mm) |
| Nozzle diameter | 1.3 (mm) |
| Suction cup type | SPB2 |
| Number of suction cells | 22 |
| Number of ejectors | 3 |
| Design vacuum generator | Ejector module SEP |
| Control valve | Normally open |
| Weight | 0.85 (kg) |
Part no.: 10.01.44.00441
Large-area vacuum gripping system with flow resistances
| Shape | Integrated vacuum generation |
| Function | controlled |
| Length L | 300 (mm) |
| Width B | 130 (mm) |
| Height H | 73.8 (mm) |
| Nozzle diameter | 1 (mm) |
| Number of suction cells | 35 |
| Number of ejectors | 3 |
| Design vacuum generator | Ejector module SEP |
| Control valve | Normally open |
| Weight | 1.21 (kg) |
Part no.: 10.01.44.00375
Large-area vacuum gripping system with flow resistances
| Shape | Integrated vacuum generation |
| Function | controlled |
| Length L | 300 (mm) |
| Width B | 130 (mm) |
| Height H | 88.1 (mm) |
| Nozzle diameter | 0.8 (mm) |
| Suction cup type | SPB2 |
| Number of suction cells | 59 |
| Number of ejectors | 3 |
| Design vacuum generator | Ejector module SEP |
| Control valve | Normally open |
| Weight | 1.31 (kg) |
